VIA Technologies VIPRO VP7806 Manual do Utilizador

user manual VIPRO VP7806 Fanless Panel PC with 6.5” TFT LCD and Touch Screen Revision 1.0 100-04122010-1958

X

1 1 Product Overview

2 The VIPRO VP7806 Fanless Panel PC is an embedded panel computer with a 6.5” TFT LCD and Five-Wire Resistive Touch Screen. It has a default 2.0 meg

3 KEY FEATURES Fanless and Ultra Low Power ConsumptionFanless and Ultra Low Power ConsumptionFanless and Ultra Low Power ConsumptionFanless and Ultr

4 SPECIFICATIONS Processor Core Logic System CPUCPUCPUCPU • VIA Nano 1.3 GHz Processor • NanoBGA2 package: compact 21 mm x 21 mm

5 Touch Screen TypeTypeTypeType • Fire-Wire Analog resistive TransparencyTransparencyTransparencyTransparency • 80% ± 3% Controller: Control

6 System I/O ports TopTopTopTop I/O Coastline on PC UnitI/O Coastline on PC UnitI/O Coastline on PC UnitI/O Coastline on PC Unit • One DB-9 c

7 Environment Specifications OperatingOperatingOperatingOperating TemperatureTemperatureTemperatureTemperature • With CompactFlash disk

8 VIPRO VP7806 DIMENSIONS Front View Back View

9 Right and Left View

II Copyright and Trademarks Copyright © 2010 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transm

10 ACCESSORIES Power cable 2-pole Phoenix Part # 99G33-250073 Panel-mount Brackets Part # 99G42-091536-A1

11 Wall-mount Brackets Part # 99G42-091376-A1 Panel/Wall-mounting Screws Part # 99G44-010395 Heatsink Grease Part # 99G26-110022

12

13 2 VIPRO VP7806 Hardware Functionality This chapter provides information about the VIPRO VP7806’s external I/O connectors, switches, LED indicato

14 INTRODUCTION OF I/O LAYOUT Front View Layout Top View Layout

15 Bottom View Layout Right and Left View Layout

16 I/O CONNECTOR FUNCTIONALITY Power Button The VIPRO VP7806 comes with a dual function Power On/Off button on the bottom I/O side that supports Sof

17 COM Port Connectors The VIPRO VP7806 provides four D-Sub 9-pin connectors: COM1, COM2, COM3 and COM4. COM1 and COM2 ports The VIPRO VP7806 pro

18 COM3 and COM4 ports The VIPRO VP7806 provides two D-Sub 9-pin connectors on the bottom I/O side, which offers standard RS-232 serial communicatio

19 LVDS Connector: LVDS2 The VIPRO VP7806 supports one external 24-bit single channel LVDS interface connector using D-Sub 26-pin connector on top I

III Safety Precautions Do’s o Always read the safety instructions carefully. o Keep this User's Manual for future reference. o All caut

20 LAN ports: Gigabit Ethernet Port 1 and 2 The VIPRO VP7806 system is equipped with two VIA VT6130 PCIe Gigabit Ethernet controllers on the mainboa

21 3 Hardware Installation and Upgrade This chapter provides information about hardware installation procedures. It is recommended to use a grounded

22 BASIC INSTALLATION Opening the Chassis Step 1Step 1Step 1Step 1 Remove the two screws from the top I/O side. Step 2Step 2Step 2Step 2 Th

23 Step 3Step 3Step 3Step 3 Slide the panel upward until the display panel is released from locking mechanism. Step 4Step 4Step 4Step 4 L

24 Step 5Step 5Step 5Step 5 Then disconnect connector A and connector B cables from the connectors on the main body of the VIPRO 7806 as show in

25 Installing the Memory Step 1Step 1Step 1Step 1 Remove the hard disk brackets by unscrewing the four screws. Step 2Step 2Step 2Step 2 Unsc

26 Step Step Step Step 3333 Insert the memory module into the SODIMM socket at a 45 degree angle. Then push down until the memory module snaps i

27 Step 5Step 5Step 5Step 5 Peel the protective layers off of the memory thermal pad on the bottom of the memory heatsink. Step Step Step Ste

28 Installing the SATA 2.5” hard disk Step 1Step 1Step 1Step 1 Remove the SATA 2.5” hard disk mounting brackets. Step 2Step 2Step 2Step 2

29 Step Step Step Step 3333 Align the mounting brackets with the mounting holes on the hard disk plate. Secure the brackets in place with four sc

IV Box Contents and Ordering Information ModelModelModelModel Number Number Number Number DescriptionDescriptionDescriptionDescription VIPRO

30 Installing the CompactFlash Card Step 1Step 1Step 1Step 1 Locate the CompactFlash access cover on the top I/O side of the VIPRO VP7806 and rem

31 Installing Panel mounting kit Panel mounting should be used in situations where only the front and bezel of the VIPRO VP7806 will be visible. St

32 StepStepStepStep 2222 Once the cutout has been prepared, slide the VIPRO VP7806 backwards into the panel opening. Step 3Step 3Step 3Step 3

33 Step 4Step 4Step 4Step 4 Secure the VIPRO VP7806 to the wall with four screws.

34 Installing Wall mounting kit (optional) Wall mounting should be used when the VIPRO VP7806 cannot be embedded into the wall. When wall mounting,

35 Step Step Step Step 2222 Secure the both mounting brackets to the wall with four wall-mounting screws.

36 SETTING UP THE JUMPERS This section will explain how to configure the VIPRO VP7806 to match the needs of your application by setting the jumpers.

37 CLEAR_CMOS: Clear CMOS jumper The CMOS RAM of VIPRO VP7806 system internal motherboard stores system configuration data and has an onboard batter

38 Step 3Step 3Step 3Step 3 To reset the CMOS settings, set the jumper on pin 2 and 3 while the system is off. Return the jumper to pin 1 and 2 a

39 AT/ATX Power mode Select The VIPRO VP7806 supports two kinds of power modes: ATX (default) and AT. The ATX mode requires a standby power connecti

V TABLE OF CONTENTS 1 Product Overview... 1 Key Feature

40 PVDD2_SEL: LCD power jumper The VIPRO VP7815 system internal motherboard provides an onboard jumper named “PVDD2_SEL” for setting the LCD signal

41 4 BIOS Setup This chapter gives a detailed explanation of the BIOS setup functions.

42 ENTERING THE BIOS SETUP MENU Power on the computer and press <DeleteDeleteDeleteDelete> during the beginning of the boot sequence to enter

43 NAVIGATING THE BIOS MENUS The main menu displays all the BIOS setup categories. Use the <LeftLeftLeftLeft>/<RightRightRightRight> and

44 MAIN MENU The Main Menu contains thirteen setup functions and two exit choices. Use arrow keys to select the items and press <EnterEnterEnterE

45 PnP/PCI Configurations Use this menu to set the PnP and PCI configurations. PC Health Status This menu shows the PC health status. Frequency/Volt

46 STANDARD CMOS FEATURES Date The date format is [Day, Month, Date, Year] Time The time format is [Hour : Minute : Second] Video Settings: [EGA/VG

47 IDE CHANNELS The specifications of your drive must match with the drive table. The hard disk will not work properly if you enter incorrect info

48 ADVANCED BIOS FEATURES Virus Warning Allows you to choose the VIRUS warning feature for IDE Hard Disk boot sector protection. Settings Descript

49 Quick Power On Self-Test Shortens Power On Self-Test (POST) cycle to enable shorter boot up time. Settings Description Disabled Standard Power

VI Setting Up the Jumpers...36 Jumper Settings...

50 Typematic Delay (Msec) This item sets the delay between, when the key was first pressed and when the system begins to repeat the signal from the

51 CPU FEATURE Thermal Management This item sets CPU’s thermal control rule to protect CPU from overheat. Settings Description Thermal Monitor 1

52 HARD DISK BOOT PRIORITY This is for setting the priority of the hard disk boot order when the “Hard Disk” option is selected in the “[First/Seco

53 ADVANCED CHIPSET FEATURES Caution:Caution:Caution:Caution: The Advanced Chipset Features menu is used for optimizing the chipset functions. D

54 INTERNAL VGA CONTROL VGA Share Memory Size This setting allows you to select the amount of system memory that is allocated to the integrated gra

55 CPU & PCI BUS CONTROL PCI Master 0 WS Write Settings: [Disabled, Enabled] PCI Delay Transaction Settings: [Disabled, Enabled] VIA PWR Manage

56 INTEGRATED PERIPHERALS

57 VIA ONCHIP IDE DEVICE CF Card ATA66 Settings: [Disabled, Enabled] SATA Controller Settings: [Disabled, Enabled] IDE DMA Transfer Access Settings

58 Secondary Master UDMA Settings: [Disabled, Auto] Secondary Slave UDMA Settings: [Disabled, Auto] IDE HDD Block Mode Settings: [Disabled, Enabled]

59 VIA ONCHIP PCI DEVICE Azalia HDA Controller Settings: [Disabled, Auto] OnBoard LAN Boot ROM Settings: [Enabled, Disabled]

VII OS Select for DRAM > 64 MB...50 HDD S.M.A.R.T Capability...

60 SUPERIO DEVICE Onboard Parallel Port Settings: [Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7] Parallel Port Mode Settings: [SPP, EPP, ECP, ECP+EPP] Wa

61 SUPERIO COM PORTS (UARTS) Onboard Serial Port 1 Settings: [Disabled, 3F8/IRQ4, 2F8/IRQ4, 3E8/IRQ4, 2E8/IRQ4] COM1 RS232/422/485 Type Settings: [

62 USB DEVICE SETTING USB 1.0 Controller Enable or disable Universal Host Controller Interface for Universal Serial Bus. Settings: [Disabled, Enabl

63 USB Storage Function Enable or disable Legacy support of USB Mass Storage. Settings: [Disabled, Enabled] USB Wireless LAN Support Settings: [Disa

64 FREEDOS CONFIGURATION Boot into FreeDOS The system will boot to FreeDOS. Settings: [Disabled, Enabled]

65 POWER MANAGEMENT SETUP ACPI Suspend Type Settings Description S1(POS) S1/Power On Suspend (POS) is a low power state. In this state,

66 Video Off Option Select whether or not to turn off the screen when system enters power saving mode, ACPI OS such as Windows XP will override this

67 WAKEUP EVENT DETECT PowerOn by PCI Card Enables activity detected from any PCI card to power up the system or resume from a suspended state. Su

68 PNP/PCI CONFIGURATIONS Note:Note:Note:Note: This section covers some very technical items and it is strongly recommended to leave the defaul

69 Resources Controlled By Enables the BIOS to automatically configure all the Plug-and-Play compatible devices. Settings Description Auto(ESCD) B

VIII Onboard Serial Port 1 ...61 COM1 RS232/422/485 Type ...

70 PC HEALTH STATUS The PC Health Status displays the current status of all of the monitored hardware devices/components such as CPU voltages, temp

71 FREQUENCY/VOLTAGE CONTROL DRAM Frequency Settings: [DDR2-400, DDR2-533, DDR2-667, SPD] DDR CAS Latency Control Settings: [2T, 3T, 4T, 5T, 6T, SP

72 Spread Spectrum When the mainboard's clock generator pulses, the extreme values (spikes) of the pulses create EMI (Electromagnetic Interfere

73 LOAD OPTIMIZED DEFAULTS This option is for restoring all the default optimized BIOS settings. The default optimized values are set by the mainbo

74 SET SUPERVISOR/USER PASSWORD This option is for setting a password for entering BIOS Setup. When a password has been set, a password prompt wil

75 SAVE & EXIT SETUP Entering “YYYY” saves any changes made, and exits the program. Entering “NNNN” will cancel the exit request.

76 EXIT WITHOUT SAVING Entering “YYYY’ discards any changes made, and exits the program. Entering “NNNN” will cancel the exit request.

77 5 Driver Installation This chapter gives you brief descriptions of each mainboard driver and application. You must install the VIA chipset driver

78 DRIVER UTILITIES Getting Started The VIPRO VP7806 includes a driver CD that contains the drivers and software for enhancing the performance of th

79 CD CONTENT  VIA VIA VIA VIA Hyperion Pro DriverHyperion Pro DriverHyperion Pro DriverHyperion Pro Driver  Compatible with all current VIA

IX DDR CAS Latency Control ..................71 DDR Burst Length.........